For a power station for a router and NAS, I recommend the CyberPower CP1500PFCLCD as the best overall fit for buyers who want a high-capacity, pure sine wave UPS, while the WALLECUBE 150W DC UPS stands out for efficient low-voltage network gear and the APC BE600M1 is a straightforward choice for a smaller setup. The right pick depends on your devices’ power draw, required runtime, and whether they accept DC backup or need standard AC outlets. A larger battery can support more equipment, but adds bulk and may not provide as much runtime as expected under load. Read on for how these models compare and what to match before choosing.
Get hardware and tech essentials delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Key Takeaways
- The CyberPower CP1500PFCLCD and 1500VA/1000W LiFePO4 models suit buyers prioritizing higher output and a pure sine wave, while their larger format is more than many router-only setups need.
- WALLECUBE and UGREEN take a different route from the AC UPS models: their DC outputs can suit compatible routers and NAS devices, but voltage, connector, and total load must match exactly.
- The APC BE600M1 and BE500G3 are modest, simpler choices for a router and a small network setup, not substitutes for a higher-capacity unit when a NAS draws more power.
- LiFePO4 construction appears in several higher-capacity options, including GOLDENMATE and Everamp; buyers should weigh battery chemistry and stated output against size and device compatibility.
- Rated VA and wattage alone do not predict outage runtime. The comparison highlights the need to check actual equipment draw, battery capacity details, and the expected duration of local outages.
| APC BE600M1 600VA UPS Battery Backup and Surge Protector | ![]() | Best Compact AC Backup | Capacity: 600VA | Maximum power: 330W | Outlets: 7 total: 5 battery-backed, 2 surge-only | VIEW ON AMAZON | See Our Full Breakdown |
| APC BE850G2 850VA/450W UPS Battery Backup and Surge Protector | ![]() | Best for More Connected Gear | Capacity: 850VA / 450W | Outlets: 9 total: 6 battery-backed, 3 surge-only | Runtime: Up to 35 minutes at 100W load | VIEW ON AMAZON | See Our Full Breakdown |
| APC Back-UPS 500VA/300W Battery Backup and Surge Protector, BE500G3 | ![]() | Best for a Basic Router Setup | Capacity: 500VA / 300W | Outlets: 6 total: 4 battery-backed, 2 surge-only | Runtime: Up to 17 minutes at 100W load | VIEW ON AMAZON | See Our Full Breakdown |
| WALLECUBE 150W DC Uninterruptible Power Supply for NAS and Network Devices | ![]() | Best Purpose-Built DC Backup | Model: W150 | Maximum power: 150W | Input voltage: 20V | VIEW ON AMAZON | See Our Full Breakdown |
| APC Back-UPS BE650G1 Uninterruptible Power Supply (650VA/390W) | ![]() | Best for Replaceable-Battery Simplicity | Capacity: 650VA / 390W | Outlets: 8 total: 4 battery-backed, 4 surge-only | Input voltage: 120V | VIEW ON AMAZON | See Our Full Breakdown |
| APC BX1500M UPS Battery Backup & Surge Protector for Computers, Electronics | ![]() | Best for Clear Status Monitoring | Capacity: 1500VA / 900W | Input voltage: 120V | Total outlets: 10 | VIEW ON AMAZON | See Our Full Breakdown |
| GOLDENMATE 1500VA/1000W LiFePO4 Pure Sine Wave UPS Battery Backup and Surge Protector | ![]() | Best for Long Battery Service Life | Capacity: 1500VA / 1000W | Battery type: LiFePO4 | Waveform: Pure sine wave | VIEW ON AMAZON | See Our Full Breakdown |
| UGREEN US3000 NAS UPS Battery Backup, 120W DC, 12,000mAh | ![]() | Best NAS-Specific Compact Backup | Battery capacity: 12,000mAh | Output: 120W DC | Backup runtime: About 10 minutes | VIEW ON AMAZON | See Our Full Breakdown |
| Everamp 1500VA/1000W LiFePO4 UPS Battery Backup and Surge Protector | ![]() | Best for All-Outlet Battery Backup | Capacity: 1500VA / 1000W | Battery type: LiFePO4 | Waveform: Pure sine wave | VIEW ON AMAZON | See Our Full Breakdown |
| GOLDENMATE 600VA/360W Lithium UPS Battery Backup & Surge Protector | ![]() | Best Compact Lithium UPS | Maximum power: 360W | Battery capacity: 76.8Wh | Battery type: LiFePO4 | VIEW ON AMAZON | See Our Full Breakdown |
| CyberPower CP1500PFCLCD 1500VA/1000W PFC Sinewave UPS Battery Backup and Surge Protector | ![]() | Best for PFC-Compatible Router and NAS Setups | Capacity: 1500VA / 1000W | Output waveform: PFC sinewave | Outlets: 12 NEMA 5-15R; 6 battery backup and surge protected, 6 surge protected | VIEW ON AMAZON | See Our Full Breakdown |
| power station for router and na | Capacity | Outlets | Battery type |
|---|---|---|---|
| APC BE600M1 600VA UPS Battery | 600VA | 7 total: 5 battery-backed, 2 surge-only | — |
| APC BE850G2 850VA/450W UPS Bat | 850VA / 450W | 9 total: 6 battery-backed, 3 surge-only | — |
| APC Back-UPS 500VA/300W Batter | 500VA / 300W | 6 total: 4 battery-backed, 2 surge-only | Lead acid |
| WALLECUBE 150W DC Uninterrupti | — | — | Lithium-ion |
| APC Back-UPS BE650G1 Uninterru | 650VA / 390W | 8 total: 4 battery-backed, 4 surge-only | — |
| APC BX1500M UPS Battery Backup | 1500VA / 900W | — | — |
| GOLDENMATE 1500VA/1000W LiFePO | 1500VA / 1000W | 8 NEMA 5-15P | LiFePO4 |
| UGREEN US3000 NAS UPS Battery | — | — | Li-ion |
| Everamp 1500VA/1000W LiFePO4 U | 1500VA / 1000W | 8; all battery-backed and surge-protected | LiFePO4 |
| GOLDENMATE 600VA/360W Lithium | — | 5 | LiFePO4 |
| CyberPower CP1500PFCLCD 1500VA | 1500VA / 1000W | 12 NEMA 5-15R; 6 battery backup and surge protected, 6 surge protected | — |
More Details on Our Top Picks
APC BE600M1 600VA UPS Battery Backup and Surge Protector
The APC BE600M1 is a straightforward choice for keeping a router, modem, and a small additional device running through a short outage. Its five battery-backed outlets give a small network setup room to grow, while the replaceable battery can extend the unit’s service life instead of requiring replacement of the whole UPS. At a 100W load, the stated runtime is 23 minutes—enough to ride out brief interruptions or shut down equipment safely, but not to sustain a NAS through a long blackout.
Compared with the APC BE850G2, this model has less output capacity and shorter stated runtime, but it is more compact and still covers a basic router-and-NAS setup if the combined load stays within its 330W limit. I would skip it if you need extended backup or more than five battery-backed connections.
Pros:- Five battery-backed outlets can cover a small network setup
- User-replaceable battery helps extend the UPS’s service life
- Compact 7.5-pound design can be wall-mounted or placed on the floor
- USB-A port provides a charging option during an outage
Cons:- Stated runtime is only 23 minutes at a 100W load
- Replacement battery is sold separately
- 330W maximum output limits headroom for additional equipment
Best for: Buyers with a router, modem, and modestly sized NAS who want a compact AC UPS for brief outages and safe shutdown.
Not ideal for: People who need long outage coverage, support for a high-draw NAS setup, or battery backup for more than five devices.
- Capacity:600VA
- Maximum power:330W
- Outlets:7 total: 5 battery-backed, 2 surge-only
- Runtime:23 minutes at 100W load
- USB port:1 USB-A, 1.5A
- Battery:User-replaceable; APCRBC154 sold separately
- Dimensions:10.79 × 4.13 × 5.47 inches
- Weight:7.5 pounds
Our verdict“Choose the BE600M1 for compact, short-duration backup for a modest router-and-NAS setup, not for keeping a larger system online for hours.”
APC BE850G2 850VA/450W UPS Battery Backup and Surge Protector
For a router-and-NAS setup with several networking accessories, the APC BE850G2 offers a useful step up from the BE600M1: it has six battery-backed outlets, nine outlets overall, and a higher 450W output limit. The stated 35 minutes at a 100W load also gives more time to ride out a short outage or shut down a NAS cleanly. Two USB-A ports add charging flexibility, though they share their output rather than serving as dedicated backup outlets.
This is the stronger fit than the APC BE500G3 when outlet count and runtime matter, but it remains an AC UPS for temporary backup—not a long-duration power station. I would choose a DC-specific model such as the WALLECUBE only when its 20V output matches the equipment; the BE850G2’s advantage is broad AC compatibility, not silent, device-specific DC backup.
Pros:- Six battery-backed outlets suit a larger home-network setup
- 450W output and stated 35-minute runtime at 100W provide more headroom than the BE600M1
- Two USB-A ports offer extra device-charging options
- User-replaceable battery and silenceable alarm support ongoing home use
Cons:- Only six of the nine outlets provide battery backup
- Replacement battery is sold separately
- Still intended for temporary backup and orderly shutdown rather than extended outages
Best for: Home-network owners with a router, NAS, modem, and several other AC-powered devices who want more backed-up outlets and runtime than a compact entry-level UPS provides.
Not ideal for: Buyers seeking hours of backup, a fanless DC solution, or battery backup on every outlet.
- Capacity:850VA / 450W
- Outlets:9 total: 6 battery-backed, 3 surge-only
- Runtime:Up to 35 minutes at 100W load
- USB ports:2 USB-A, 5V/2.4A shared
- Battery:User-replaceable; RBC17 sold separately
- Battery charge time:8 hours
- Dimensions:12.87 × 4.13 × 5.47 inches
- Warranty:3 years
Our verdict“Pick the BE850G2 if you need several AC devices backed up at once and want more runtime than the smaller APC models provide.”
APC Back-UPS 500VA/300W Battery Backup and Surge Protector, BE500G3
The APC BE500G3 is the simplest fit here for a router and modem that need brief outage protection, with a compact, wall-mountable body and USB-C plus USB-A ports. Its four battery-backed outlets can cover a small number of essential devices, while the two surge-only outlets leave room for gear that does not need to stay on. At a 100W load, its stated runtime is up to 17 minutes, so I’d treat it as a way to bridge short interruptions or allow a controlled NAS shutdown—not as extended NAS power.
Compared with the BE600M1, the BE500G3 has lower capacity and fewer battery-backed outlets, but it adds USB-C and a wall-mount option. The BE850G2 is a better match for a larger setup or longer runtime. I would skip this one if the NAS and network equipment together draw close to its 300W limit.
Pros:- USB-C and USB-A ports add charging flexibility
- Wall-mountable design can free up desk or shelf space
- Four battery-backed outlets suit a small essential-device setup
- Three-year warranty and equipment protection are included
Cons:- Stated runtime is up to 17 minutes at a 100W load
- Only four outlets provide battery backup
- USB ports share a 5V/3A output
Best for: Buyers with a router, modem, and perhaps one other essential device who want a compact UPS with USB-C and wall-mount flexibility.
Not ideal for: NAS owners with multiple accessories, higher power draw, or a need to keep equipment running well beyond a short outage.
- Capacity:500VA / 300W
- Outlets:6 total: 4 battery-backed, 2 surge-only
- Runtime:Up to 17 minutes at 100W load
- USB ports:1 USB-C and 1 USB-A; 5V/3A shared
- Battery type:Lead acid
- Battery charge time:8 hours
- Mounting:Desktop or wall-mountable
- Warranty:3 years
Our verdict“Choose the BE500G3 for a compact router-and-modem setup, but look to the BE850G2 if your NAS setup needs more outlet capacity or runtime.”
WALLECUBE 150W DC Uninterruptible Power Supply for NAS and Network Devices
The WALLECUBE W150 takes a different approach from the APC units: it is a compact, fanless 20V DC UPS designed for compatible NAS and network equipment. Its stated sub-1ms switchover is aimed at keeping a supported device from dropping power when the mains fail, while app monitoring can make battery status and alerts easier to track. The quiet operation and small footprint are appealing beside a router or home server where a conventional AC UPS may be bulkier than needed.
Unlike the BE850G2, this is not a general-purpose outlet bank: the 20V input and output make compatibility the deciding factor, and its 150W ceiling leaves less room for a broader collection of gear. The stated two-hour runtime may suit a low-draw setup, but actual endurance depends on load. I would skip it unless your devices match its DC requirements.
Pros:- Sub-1ms switchover is designed to avoid power interruption for compatible equipment
- Fanless operation avoids adding fan noise near a home office or network shelf
- App monitoring provides status and alert access
- Compact metal enclosure takes little space near network equipment
Cons:- 20V DC compatibility restricts which devices can connect
- 150W maximum output rules out higher-draw or expanded setups
- Stated two-hour runtime may not cover a long outage, especially at higher loads
Best for: Owners of compatible 20V DC NAS or network equipment who want a quiet, compact backup unit with app monitoring and rapid switchover.
Not ideal for: Buyers whose router or NAS uses a different DC voltage, anyone needing standard AC outlets, or setups whose load exceeds 150W.
- Model:W150
- Maximum power:150W
- Input voltage:20V
- Output:20V, 10A
- Battery type:Lithium-ion
- Runtime:2 hours
- Charge time:4 hours
- Dimensions and weight:3.9 × 4.7 × 1.5 inches; 780g
Our verdict“Choose the WALLECUBE W150 when your NAS or network gear supports 20V DC and quiet, device-specific backup matters more than general AC compatibility.”
APC Back-UPS BE650G1 Uninterruptible Power Supply (650VA/390W)
The APC BE650G1 is a conventional AC UPS for buyers who want battery backup for a router, modem, and NAS without moving to a larger unit. Four battery-backed outlets cover essential equipment, and the user-replaceable battery makes maintenance more practical over the long term. Its 390W ceiling is above the BE500G3’s 300W rating, giving a little more room for connected gear, though the supplied data does not specify a runtime beyond the approximate 22 minutes at a 100W load.
Compared with the BE600M1, the BE650G1 offers eight outlets overall but still has only four battery-backed connections; the BE850G2 is the clearer choice if you need more backed-up outlets and a stated longer runtime. I’d pick this model for a simple, maintainable setup, not for lengthy outage coverage. The battery is sold separately when replacement is needed.
Pros:- 390W output offers more capacity than the BE500G3
- User-replaceable battery can extend the unit’s service life
- Eight total outlets provide room for surge-protected accessories
- LED indicators and audible alerts communicate UPS status
Cons:- Only four of the eight outlets provide battery backup
- Replacement battery is sold separately
- Approximate runtime of 22 minutes at 100W is limited for extended outages
Best for: Home-office and NAS owners who want a standard AC UPS with a replaceable battery and enough output for a modest network setup.
Not ideal for: People who need more than four battery-backed outlets, verified extended runtime, or a compact DC-only backup solution.
- Capacity:650VA / 390W
- Outlets:8 total: 4 battery-backed, 4 surge-only
- Input voltage:120V
- Output voltage:120V
- Runtime:Approximately 22 minutes at 100W load
- Plug type:NEMA 5-15P
- Dimensions:11.89 × 7.09 × 3.46 inches
- Weight:13.6 pounds
Our verdict“Choose the BE650G1 for maintainable, short-term AC backup for a modest router-and-NAS setup, but choose the BE850G2 if you need more backed-up outlets and longer stated runtime.”
APC BX1500M UPS Battery Backup & Surge Protector for Computers, Electronics
The APC BX1500M suits a router-and-NAS setup that needs broad outlet coverage and an at-a-glance view of backup status. Its 1500VA/900W capacity leaves room for networking gear and other home-office equipment, while the LCD reports load, battery charge, and estimated runtime. Automatic Voltage Regulation handles modest voltage swings without using battery power, which can preserve backup for an actual outage. Compared with the Everamp 1500VA/1000W, the APC has lower wattage and a stepped-approximation waveform rather than pure sine wave, but its ten outlets offer more connection flexibility. Five outlets are surge-only, so I would reserve the battery-backed group for the router, NAS, and other equipment that must stay online. Its replaceable battery is useful for long-term ownership, though replacements are sold separately.
Pros:- 1500VA/900W capacity supports a router-and-NAS setup plus additional equipment.
- LCD displays load, battery charge, and runtime information.
- Automatic Voltage Regulation addresses voltage fluctuations without draining the battery.
- Ten protected outlets include five battery-backed outlets and data-line protection.
Cons:- Only five of the ten outlets provide battery backup.
- Stepped-approximation sine wave may not suit sensitive equipment.
- Replacement battery is sold separately, and runtime is limited under heavy loads.
Best for: Home-office owners connecting a router, NAS, and several peripherals who want an LCD status panel and Automatic Voltage Regulation.
Not ideal for: Buyers whose NAS calls for pure sine wave output, or anyone who needs every outlet battery-backed or extended outage runtime.
- Capacity:1500VA / 900W
- Input voltage:120V
- Total outlets:10
- Battery-backed outlets:5
- Voltage regulation:Automatic Voltage Regulation (±13%)
- LCD display:Yes
- Replaceable battery:Yes; APCRBC124 sold separately
Our verdict“Choose the APC BX1500M if you want outlet flexibility and useful status information, but skip it if your NAS requires pure sine wave output.”
GOLDENMATE 1500VA/1000W LiFePO4 Pure Sine Wave UPS Battery Backup and Surge Protector
For a router and NAS that may stay in service for years, the GOLDENMATE 1500VA/1000W pairs pure sine wave output with a LiFePO4 battery rated for over 3,000 charge cycles. That combination gives it a stronger long-term case than the APC BX1500M, whose stepped-approximation output is less suited to equipment that specifies a pure sine wave. Eight outlets cover a straightforward home network, and the communication port can support a connected computer or NAS shutdown process. USB-C and USB-A ports add charging convenience, but their combined output is only 10W, so they are not a substitute for powering substantial devices. The tradeoff is its cooling fan, which can run during heavy battery use, and the unit may not recognize generator power. I would favor it for utility-powered setups over outage systems built around a generator.
Pros:- Pure sine wave output is a good fit for equipment that calls for that waveform.
- LiFePO4 battery is rated for over 3,000 charge cycles and up to 10 years of use.
- Communication port can support connected-device shutdown procedures.
- Eight outlets and an LCD provide useful connectivity and status information.
Cons:- Cooling fan activates during heavy battery use and may be audible.
- May not recognize generator power.
- USB-A and USB-C ports provide only 10W total.
Best for: NAS owners seeking pure sine wave backup and a long-cycle LiFePO4 battery for a fixed home or small-office setup on utility power.
Not ideal for: People who run their backup system from a generator, need silent operation during heavy battery use, or want a high-output USB charging hub.
- Capacity:1500VA / 1000W
- Battery type:LiFePO4
- Waveform:Pure sine wave
- Outlets:8 NEMA 5-15P
- Input voltage:90–140V AC
- USB charging:1 USB-C and 1 USB-A; 10W total
- Cooling fan noise:Below 50 dB
Our verdict“Pick this GOLDENMATE if you value pure sine wave output and long battery life on utility power, but look elsewhere for generator compatibility or quiet high-load operation.”
UGREEN US3000 NAS UPS Battery Backup, 120W DC, 12,000mAh
The UGREEN US3000 takes a different approach from the AC tower UPS options here: it is a compact 120W DC backup made for select UGREEN NAS models. Its seamless transfer and automatic shutdown and restart features focus on protecting NAS operations and data, rather than keeping a whole desk of devices running. App notifications add a useful way to track an outage, while its small, lightweight form is easier to place near a NAS than the Everamp 1500VA/1000W. That smaller scope is also its main limitation: listed backup runtime is about 10 minutes, and compatibility is limited to specific UGREEN models. It does not replace a conventional UPS for a router or other equipment unless those devices are supported through a separate arrangement. I would choose it as targeted NAS protection, not as an all-purpose network backup.
Pros:- Seamless power transfer helps keep supported NAS models running through brief outages.
- Automated shutdown and restart features support NAS data protection.
- App notifications provide outage and status alerts.
- Compact 441g design takes less space than a tower UPS.
Cons:- Compatible only with the listed UGREEN NAS models.
- About 10 minutes of backup runtime limits its role to short outages and shutdown time.
- 120W DC output is not a general-purpose AC supply for a router-and-NAS stack.
Best for: Owners of a listed compatible UGREEN NAS who want compact DC backup with app alerts and automated shutdown and restart support.
Not ideal for: Buyers with another NAS brand, or anyone needing one UPS to power a router, NAS, and several AC devices together.
- Battery capacity:12,000mAh
- Output:120W DC
- Backup runtime:About 10 minutes
- Battery type:Li-ion
- Compatible models:DXP2800, DXP4800, DXP4800 Pro, DXP4800 Plus, DXP480T, DH2300, DH4300 Plus
- Dimensions:8.07 x 5.31 x 1.46 inches
- Weight:441g
- Warranty:2 years
Our verdict“Choose the UGREEN US3000 for a compatible UGREEN NAS needing compact, automated short-term backup, not for a mixed-brand network rack.”
Everamp 1500VA/1000W LiFePO4 UPS Battery Backup and Surge Protector
The Everamp 1500VA/1000W stands out for a simple practical reason: all eight outlets are battery-backed, so a router, NAS, and other essential devices can share outage protection without sorting through a mix of backup and surge-only sockets. Its pure sine wave output and LiFePO4 battery rated for 3,000+ cycles also make it a closer match for long-term NAS use than the APC BX1500M. The listed runtime reaches up to 24 minutes at a 500W load, though a typical router-and-NAS load may differ, so I would not treat that figure as a guaranteed runtime for every setup. USB auto-shutdown support and a front LCD help manage connected equipment. The metal tower is heavier than similar units, battery charging takes 10 hours, and its 120V input makes it a conventional mains UPS rather than a portable power station.
Pros:- All eight outlets provide battery backup and surge protection.
- Pure sine wave output suits equipment that calls for it.
- LiFePO4 battery is rated for over 3,000 charge cycles and over 10 years.
- USB auto-shutdown support and LCD status display help manage connected devices.
Cons:- Heavy metal tower is less convenient to move than compact UPS options.
- The 24-minute runtime figure applies to a 500W load and may not match a particular setup.
- Battery charge time is 10 hours.
Best for: Home-office or small-business users who want pure sine wave backup for a router, NAS, and several other devices, with every outlet battery-backed.
Not ideal for: Buyers who need a lightweight portable unit, fast recharge after an outage, or guaranteed runtime figures for a specific router-and-NAS load.
- Capacity:1500VA / 1000W
- Battery type:LiFePO4
- Waveform:Pure sine wave
- Outlets:8; all battery-backed and surge-protected
- Transfer time:Less than 10 ms
- Maximum runtime:Up to 24 minutes at a 500W load
- USB ports:USB-A and USB-C
- Battery charge time:10 hours
Our verdict“Choose the Everamp if you want every outlet battery-backed and pure sine wave output, but skip it if portability or quick recharge matters more.”
GOLDENMATE 600VA/360W Lithium UPS Battery Backup & Surge Protector
For a modest router-and-NAS combination, the GOLDENMATE 600VA/360W offers a smaller, lighter alternative to the 1500VA towers in this group. Its 76.8Wh LiFePO4 battery is rated for 3,000+ charge cycles and 10+ years of use, and a three-hour charge time is shorter than the Everamp’s stated 10 hours. The compact, wall-mountable design can suit a network shelf where a full tower UPS is awkward. Capacity is the dividing line: at 360W, it has less headroom for additional equipment or a higher-draw NAS than the GOLDENMATE 1500VA/1000W. Its simulated sine wave output is another reason to check device requirements before buying. Five outlets, USB charging, a communication port, and an emergency light make it practical, but this is a small-system backup rather than a high-capacity solution.
Pros:- Compact, wall-mountable design fits tighter network spaces than a tower UPS.
- LiFePO4 battery is rated for 10+ years and 3,000+ charge cycles.
- Three-hour battery charge time is shorter than the Everamp’s stated charge time.
- Includes five outlets, USB charging, a communication port, and an emergency light.
Cons:- 360W maximum output offers limited headroom for additional equipment.
- Simulated sine wave output may not suit devices that require pure sine wave.
- The supplied data does not specify outage runtime for a router-and-NAS load.
Best for: Apartment dwellers and home-network owners powering a low-draw router and NAS who want a compact UPS with a long-life lithium battery.
Not ideal for: Users with higher-power NAS equipment, multiple added devices, or equipment that requires pure sine wave output.
- Maximum power:360W
- Battery capacity:76.8Wh
- Battery type:LiFePO4
- Outlets:5
- Input voltage:120V
- Output voltage:120V
- Battery charge time:3 hours
- Dimensions and weight:11.69 x 5.67 x 3.43 inches; 6.8 pounds
Our verdict“Pick the compact GOLDENMATE for a low-draw router-and-NAS setup with tight space, but choose a higher-capacity pure sine wave UPS for demanding equipment.”
CyberPower CP1500PFCLCD 1500VA/1000W PFC Sinewave UPS Battery Backup and Surge Protector
For a router and NAS that need dependable AC backup, this CyberPower pairs 1000W capacity with a PFC sinewave output, making it a stronger fit for active-PFC power supplies than basic small-office UPS models such as the APC BE600M1. Its automatic voltage regulation can correct minor fluctuations without drawing on the batteries, which helps preserve backup time for an actual outage. The LCD reports power and battery status, giving you a clearer view of the load than a basic backup unit. The tradeoff is outlet allocation: only six of its 12 outlets have battery backup, so plan carefully for the router, NAS, and any other devices that must stay online. At 24.9 pounds, it is also less convenient to move than compact DC options such as the WALLECUBE.
Pros:- PFC sinewave output supports equipment with active-PFC power supplies.
- 1000W capacity provides room for a router, NAS, and additional connected equipment within the UPS load limit.
- LCD shows power and battery status at a glance.
- AVR corrects minor voltage fluctuations without using battery power.
Cons:- Only six of the 12 outlets provide battery backup; the other six offer surge protection only.
- The 24.9-pound mini-tower is less portable than compact DC UPS options.
- Requires two 12V batteries.
Best for: Home NAS owners running an active-PFC power supply alongside a router, modem, and other AC networking equipment who want a high-capacity UPS with status information.
Not ideal for: Buyers seeking a lightweight, battery-powered DC backup for only a router and NAS, or setups that need battery backup on more than six connected devices.
- Capacity:1500VA / 1000W
- Output waveform:PFC sinewave
- Outlets:12 NEMA 5-15R; 6 battery backup and surge protected, 6 surge protected
- USB ports:1 Type-A, 1 Type-C
- Voltage regulation:Automatic Voltage Regulation (AVR)
- Dimensions:14 x 3.9 x 11 inches
- Weight:24.9 pounds
- Warranty:3 years, including batteries
- Connected equipment guarantee:$500,000
Our verdict“Choose this CyberPower for an AC-powered router-and-NAS setup that benefits from PFC sinewave output, AVR, and higher capacity, provided six battery-backed outlets are enough.”

How We Picked
I ranked these models around the needs of a router-and-NAS setup: dependable backup for sensitive equipment, enough output for the intended load, practical connections, and a clear fit for likely outage scenarios. I gave weight to output type as well as capacity, since a device that works well with standard AC plugs may not be the simplest or most efficient match for DC-powered networking gear. I also considered how easily a buyer can judge compatibility and whether each unit makes sense for a compact setup or a larger home network.
The order favors versatile choices that can support a typical router-and-NAS combination without pushing every buyer toward a bulky high-output unit. Compact DC UPS models rank well for compatible low-voltage equipment but are less flexible when plugs or voltage differ. Higher-capacity UPS models earn their place for larger loads and added headroom, while their size and potential overbuying count against them for basic networking. Product specifications supplied for this roundup do not establish exact runtime for a particular setup, so I do not treat capacity class alone as a promise of backup duration.
| power station for router and na | Battery type |
|---|---|
| APC BE600M1 600VA UPS Battery | — |
| APC BE850G2 850VA/450W UPS Bat | — |
| APC Back-UPS 500VA/300W Batter | Lead acid |
| WALLECUBE 150W DC Uninterrupti | Lithium-ion |
| APC Back-UPS BE650G1 Uninterru | — |
| APC BX1500M UPS Battery Backup | — |
| GOLDENMATE 1500VA/1000W LiFePO | LiFePO4 |
| UGREEN US3000 NAS UPS Battery | Li-ion |
| Everamp 1500VA/1000W LiFePO4 U | LiFePO4 |
| GOLDENMATE 600VA/360W Lithium | LiFePO4 |
| CyberPower CP1500PFCLCD 1500VA | — |
Factors to Consider When Choosing Power Station For Router And Nas
Choosing a backup for a router and NAS is less about picking the biggest number and more about matching power delivery to your equipment and outage plan. I would start with compatibility and measured load, then decide how much runtime and shutdown support the setup needs.
Match AC or DC output to your equipment
Check the power input printed on each device and on its power adapter before choosing a UPS. AC UPS models can use the adapters you already own, which makes them flexible when your router and NAS have different requirements. DC UPS units can avoid extra conversion for compatible devices, but the voltage, polarity, connector size, and output limits must all match. A connector that fits is not proof that the power is correct. If your setup includes a mix of AC and DC equipment, count the outlets and outputs you will actually use rather than buying based on one device. I would favor an AC model when compatibility is uncertain and a DC unit only when the full chain is confirmed.
Estimate runtime from the real load
VA and watt ratings describe limits, not how long a battery will run your gear. Add the actual watt draw of the router, modem, switches, and NAS, using measured consumption when possible rather than the maximum printed on adapters. NAS load can change as drives spin up or run intensive tasks, so leave headroom instead of sizing right at the limit. Runtime also falls as the connected load rises, and published capacity figures may not translate directly into usable backup time. Decide whether you need a brief bridge through a flicker, time to save work and shut down, or continued connectivity through a longer outage. Those are different goals and can call for different battery sizes.
Plan for safe NAS shutdown
A UPS can keep a NAS powered during an outage, but backup power alone does not tell the NAS when to shut down. Check whether your NAS supports communication with the UPS over USB or another supported interface, then confirm that the selected model offers the connection your system needs. Without a shutdown signal, a long outage can drain the battery and cut power abruptly, risking interrupted writes or file-system checks. If graceful shutdown matters, review the NAS maker’s compatibility list and configuration steps before purchase. A compact DC unit may suit a router well yet lack the controls or connection options needed for NAS shutdown. Treat shutdown support as a separate requirement from runtime.
Choose waveform and capacity for the load
Some equipment can be sensitive to the waveform supplied while running on battery, so check the NAS and power-supply documentation rather than assuming every UPS output behaves the same. Pure sine wave models, such as the CyberPower CP1500PFCLCD and the listed 1000W LiFePO4 units, can be a useful fit when equipment makers specify that output. More capacity and output headroom can support extra network devices or a higher-draw NAS, but they also bring a larger unit and can be unnecessary for a single router. Do not confuse a high VA figure with a guarantee of longer runtime or better compatibility. Buy for your actual load and required backup behavior, not for a headline rating alone.
Think through battery type, placement, and upkeep
Battery chemistry can affect service life, replacement plans, and the unit’s overall size, so compare the manufacturer’s battery guidance rather than focusing on chemistry in isolation. Several models here use LiFePO4 batteries, while the lineup also includes conventional UPS designs; each still needs a suitable location and care. Keep the unit where its vents are clear, away from heat and moisture, and close enough to reach its outlets and status controls. Check whether the battery is replaceable and what maintenance or self-test schedule the maker recommends. A compact backup is easier to place near network gear, while larger models can take more room and may be harder to position. Factor those practical details into the choice before buying.
Separate network uptime from internet uptime
Backing up your router and NAS does not automatically keep the internet connection alive. The modem, fiber ONT, or other provider equipment may also need power, and all connected devices add to the UPS load. If the goal is remote access during an outage, include the provider’s handoff equipment and any switches or access points in your power plan. Local NAS access can continue even when the broadband connection is down, but cloud access and remote services may not. A common mistake is to size a UPS for the router and NAS alone, then discover that the modem or ONT loses power first. List every device needed for the intended outcome before estimating runtime.
Frequently Asked Questions
Can I use a DC UPS with both my router and NAS?
Only if the DC UPS provides the correct voltage, polarity, connector, and enough output for both devices at the same time. Some routers and NAS units use different voltages or plugs, so a matching-looking connector is not enough to confirm compatibility. Check each device’s input label and add their power demands before connecting them. If the required outputs or compatibility are unclear, an AC UPS with the original power adapters is usually the more flexible route. Confirm that the DC unit’s total output limit covers the combined load, including brief higher demand.
How do I know how much runtime my router and NAS will get?
Start by measuring the combined watts used by the router, NAS, and any modem or network gear you want backed up. Compare that load with the UPS’s published runtime chart, if available; a VA or watt rating by itself does not reveal battery duration. NAS activity and drive spin-up can change consumption, so leave room above the typical reading. Battery age, temperature, and the UPS’s usable capacity also affect results. If uninterrupted operation is not required, plan for enough time to trigger and complete a safe NAS shutdown rather than guessing at an all-night runtime.
Will a UPS automatically shut down my NAS during a long outage?
Not automatically in every setup. The NAS must be able to communicate with the UPS, and the UPS needs a supported data connection and compatible configuration for shutdown signaling. Check your NAS maker’s compatibility guidance and the UPS connection options before buying. If that link is unavailable, the UPS may keep the NAS running until the battery is depleted, followed by an abrupt power loss. Test the shutdown settings during a controlled setup period so you know the NAS responds before relying on it during an outage.
Do I need pure sine wave output for a home NAS?
It depends on the NAS power supply and its maker’s guidance. Pure sine wave models can be a suitable choice for equipment that specifies or benefits from that output, but the waveform alone does not guarantee compatibility or longer runtime. Check the NAS documentation and the UPS specifications together. Also consider the load, outlets, battery capacity, and shutdown connection, since those affect the backup experience just as much. If your equipment works with a standard UPS output, paying for a higher-output model may not solve a different limitation such as inadequate runtime.
Should I back up the modem or fiber ONT along with the router and NAS?
Yes, if you want internet connectivity to remain available during an outage and your provider equipment loses power when the home does. Add the modem or ONT to the UPS load calculation, along with any switch or access point required for your network. Your broadband service may still go offline if the provider’s own network has no backup power, so a UPS cannot promise internet access in every outage. If local access to the NAS is the only goal, keeping the NAS and the devices needed for local networking powered may be sufficient. Match the protected equipment to the outcome you want, then check the resulting load and runtime.
Conclusion
For most buyers seeking one flexible backup for a router and NAS, I would start with the CyberPower CP1500PFCLCD as the best overall choice, particularly when pure sine wave output and higher capacity matter. For a compact, compatible DC setup, the WALLECUBE 150W DC UPS is my best value-style pick, while the UGREEN US3000 is another focused option for buyers whose devices match its DC output. The GOLDENMATE 1500VA/1000W LiFePO4 and Everamp 1500VA/1000W LiFePO4 suit buyers seeking a higher-output premium format; compare their connection options and battery details before choosing. Beginners with a modest setup can start with the APC BE600M1 for a familiar, straightforward AC UPS, while the APC BE500G3 is another smaller-load option. If you need broader capacity for several devices, consider the APC BX1500M or APC BE850G2; if your load is light, avoid paying for output you will not use. In every case, verify compatibility, NAS shutdown support, and expected runtime against your actual equipment.











